Lubrichem Oils Private Limited

**Soluble cutting oils** are a type of water-miscible cutting fluid, meaning they can be mixed with water to form an emulsion. These oils are used in metalworking processes like cutting, drilling, grinding, and milling to provide cooling, lubrication, and rust protection during operations. When mixed with water, they create a milky or translucent solution that aids in heat dissipation, tool life extension, and the removal of chips and debris.
### Key Features:1. **Water-Miscibility**: Soluble cutting oils are designed to emulsify in water, forming a stable, milk-like solution that improves heat transfer and cooling during machining.   2. **Lubrication**: They provide essential lubrication between the cutting tool and the workpiece, reducing friction, heat, and wear.
3. **Cooling**: The water content in the emulsion absorbs heat generated during machining, keeping both the tool and the workpiece at optimal temperatures.
4. **Chip Removal**: The emulsion helps wash away metal chips and debris, preventing them from interfering with the cutting process and minimizing tool damage.
5. **Corrosion Protection**: Many soluble oils include additives that prevent rust and corrosion on both the machine and workpieces, especially important for ferrous metals.
### Advantages:- **Effective Cooling**: The water-based solution cools better than pure oil, as water has a higher heat capacity, making it ideal for high-speed operations.- **Cost-Effective**: Soluble cutting oils are generally less expensive than straight oils or fully synthetic fluids, offering a good balance of performance and cost.- **Environmentally Friendly**: They often have lower environmental impact compared to pure mineral oils, as they use water as a primary base, reducing waste and disposal concerns.
### Disadvantages:- **Microbial Growth**: Since soluble oils contain water, they can be susceptible to bacterial and fungal growth, leading to bad odors, reduced performance, and potential health hazards. Regular maintenance and filtration are needed to prevent contamination.- **Emulsion Stability**: If not mixed correctly, or if the water quality is poor, the emulsion can break down, reducing the oil’s performance.- **Limited Lubrication**: While they offer good cooling properties, their lubrication capabilities are generally not as strong as those of neat oils or full synthetics.
### Applications:- **Turning and Milling**: Ideal for high-speed operations where heat buildup is a concern.- **Drilling and Tapping**: Common in operations where cooling and lubrication are critical for tool life and surface finish.- **Grinding**: Used in grinding to reduce heat and prevent burn marks on the workpiece.- **Sawing**: Emulsions provide cooling and chip removal during sawing operations.
### Maintenance:- **Proper Mixing**: Soluble oils must be mixed in the correct ratio with water (often specified by the manufacturer), as incorrect dilution can affect performance.- **Regular Filtration**: The solution should be filtered regularly to remove metal shavings and contaminants.- **pH Monitoring**: The pH of the emulsion should be monitored and adjusted to prevent microbial growth and maintain optimal performance.
In conclusion, soluble cutting oils are an excellent choice for many metalworking operations, offering a cost-effective solution that combines cooling, lubrication, and corrosion protection. Regular maintenance is essential to keep the emulsion stable and ensure optimal performance.

**Soluble cutting oils** are a type of water-miscible cutting fluid, meaning they can be mixed with water to form an emulsion. These oils are used in metalworking processes like cutting, drilling, grinding, and milling to provide cooling, lubrication, and rust protection during operations. When mixed with water, they create a milky or translucent solution that aids in heat dissipation, tool life extension, and the removal of chips and debris.
### Key Features:1. **Water-Miscibility**: Soluble cutting oils are designed to emulsify in water, forming a stable, milk-like solution that improves heat transfer and cooling during machining.   2. **Lubrication**: They provide essential lubrication between the cutting tool and the workpiece, reducing friction, heat, and wear.
3. **Cooling**: The water content in the emulsion absorbs heat generated during machining, keeping both the tool and the workpiece at optimal temperatures.
4. **Chip Removal**: The emulsion helps wash away metal chips and debris, preventing them from interfering with the cutting process and minimizing tool damage.
5. **Corrosion Protection**: Many soluble oils include additives that prevent rust and corrosion on both the machine and workpieces, especially important for ferrous metals.
### Advantages:- **Effective Cooling**: The water-based solution cools better than pure oil, as water has a higher heat capacity, making it ideal for high-speed operations.- **Cost-Effective**: Soluble cutting oils are generally less expensive than straight oils or fully synthetic fluids, offering a good balance of performance and cost.- **Environmentally Friendly**: They often have lower environmental impact compared to pure mineral oils, as they use water as a primary base, reducing waste and disposal concerns.
### Disadvantages:- **Microbial Growth**: Since soluble oils contain water, they can be susceptible to bacterial and fungal growth, leading to bad odors, reduced performance, and potential health hazards. Regular maintenance and filtration are needed to prevent contamination.- **Emulsion Stability**: If not mixed correctly, or if the water quality is poor, the emulsion can break down, reducing the oil’s performance.- **Limited Lubrication**: While they offer good cooling properties, their lubrication capabilities are generally not as strong as those of neat oils or full synthetics.
### Applications:- **Turning and Milling**: Ideal for high-speed operations where heat buildup is a concern.- **Drilling and Tapping**: Common in operations where cooling and lubrication are critical for tool life and surface finish.- **Grinding**: Used in grinding to reduce heat and prevent burn marks on the workpiece.- **Sawing**: Emulsions provide cooling and chip removal during sawing operations.
### Maintenance:- **Proper Mixing**: Soluble oils must be mixed in the correct ratio with water (often specified by the manufacturer), as incorrect dilution can affect performance.- **Regular Filtration**: The solution should be filtered regularly to remove metal shavings and contaminants.- **pH Monitoring**: The pH of the emulsion should be monitored and adjusted to prevent microbial growth and maintain optimal performance.
In conclusion, soluble cutting oils are an excellent choice for many metalworking operations, offering a cost-effective solution that combines cooling, lubrication, and corrosion protection. Regular maintenance is essential to keep the emulsion stable and ensure optimal performance.

Water Soluble Cutting Oil is more commonly referred to as soluble oils. This however, is a misnomer because they are not really soluble in water but form an emulsion when added to water. These emulsifiable oils are mineral oil based concentrates, which contain emulsifiers that allow them to mix with water and form a milky white emulsion. They also contain additives to improve their lubricating properties, rust and corrosion inhibitors and a biocide to help control foul smell.

Owing to perfection and quality-focused approach, we have carved niche in the industry by offering an outstanding array of Premium Soluble Cutting Oil. In order to make certain the quality of our oils, adept professionals test the whole assortment on distinct parameters set by the industry. Special additives and rust preventives are added to ensure excellent performance and to minimize bacterial growth in the emulsion.

Features:

• Excellent stability upto 400 ppm
• Excellent corrosion protection
• Good Flushing characteristics

ALESSA - 16 Conventional Type Water Soluble Metal Working FluidALESSA - 16 meets all needs and expectations of modern machining. This conventional type oil has verygood flushing and cooling properties, which is suitable for operations like Grinding, Drilling, Milling andTurning. It forms a spontaneous white semi translucent emulsion. Due to good flushing properties the chipcarry is fantastic, giving specified finish. It is equipped with effectiveAnti-rusting compounds to protect the machined components form rusting for 2-3 shifts. It’s uniqueextreme pressure additives and fungicides dosage; make it all-purpose coolant with moderate bath life and nobad smell even when bath is unused for one day.

FINE KUT SS6000 - Premium cutting oil ,Suitable for all metals for machining operations where emulsifiable oils are normally used. The recommended concentration is between 3 to 5% depending on the severity of machining. Product can be used successfully even for grinding operations & works in hard water coditions up to 700 PPM

Soluble Cutting Oil Suitable for all metals for machining operations where emulsifiable oil are normally used. The recommended concentration is between 5 to 10 % depending on the severity of machining. Sometimes used successfully for even grinding operations. this products works upto 40 PPM hard water

We are offering Water Soluble Cutting Oil Emulsifier to our clients which is manufactured component wise in our in house facility since last 30 years .